In order to determine the suitability of the weldment for its intended purpose, some degree of nondestructive examination\/testing (NDE\/NDT) should be conducted as part of sound fabrication practice and quality assurance. For non-code fabrication, NDE may be as simple as visual or liquid\/dye penetrant inspection. For code fabrication, certain mandatory inspections may be required. These NDE methods should be considered for both intermediate inspections during multi-pass welding, as well as for final acceptance of the weldment.<\/p>\n\n\n\n
NDE methods are similar to those used for carbon and stainless steels. Liquid\/dye penetrant inspection is commonly used to reveal surface defects, such as hot-cracking. Radiographic and ultrasonic testing can be used to detect for subsurface defects and thoroughly check the soundness of the weldment; however, the results can be difficult to interpret and these methods are generally not well suited for inspection of fillet welds. Magnetic particle inspection is not an effective NDE method for Ni-\/Co-base alloys since they are non-magnetic. If further information is required, it is suggested that the fabricator consult with an outside laboratory that is experienced with NDE of Ni-\/Co-base alloy welds.<\/p>\n\n\n\n