phone-icon800.354.0806
765.456.6012
The Home of HASTELLOY® and
HAYNES® Alloys
Waterjet Cutting

Tolerance Guidelines:
Material tolerances not listed below shall be in accordance with the ASTM, ASME, or AMS specification to which the material was produced and certified.

Minimum width/length:     2”/3”
Minimum cut shape size: 3"
Minimum hole size:          2× thickness with a minimum of 0.125” 
Kerf:                                 Approximately 0.062”

Website Waterjet
Standard cutting tolerances are as follows:

  • 0.015" to 0.1875" thick:
      - width/length +/-0.030" ≤ 96”           OD/ID + 0.062”/-0 OD & + 0/-0.062” ID
      - width/length +/-0.062” > 96”
  • >0.1875" to 2.0" thick:
      - width/length +/-0.062"                    OD/ID + 0.125”/-0 OD & + 0/-0.125” ID
  • >2.0" thick: +/-0.125"
      - width/length +/-0.125"                    OD/ID + 0.250”/-0 OD & + 0/-0.250” ID
  • Diagonal tolerance is 3/16" maximum on waterjet cut items.

If you require tighter tolerances or smaller pieces, please contact one of our sales representatives

Drawings in .dxf format are preferred. Call for other formats.

Print Page
Back to top