phone-icon800.354.0806
765.456.6012
The Home of HASTELLOY® and
HAYNES® Alloys

Wear Resistance

HAYNES® 25 alloy exhibits excellent resistance to metal galling. Wear results shown below were generated for standard matching material room-temperature pin on block tests. Degrees of damage are given as a function of applied load. The results indicate that 25 alloy is superior in galling resistance to many materials, and is surpassed only by ULTIMET® alloy and HAYNES 6B alloy. Both of these materials were specifically designed to have excellent wear resistance.

Alloy Degree of Damage for Various Applied Loads
3,000 lbs. (1,365 kg) 6,000 lbs. (2,725 kg) 9,000 lbs. (4,090 kg)
- mils µm mils µm mils µm
6B 0.02 0.6 0.03 0.7 0.02 0.5
ULTIMET® 0.11 2.9 0.11 2.7 0.08 2.0
25 0.23 5.9 0.17 4.2 0.17 4.2
188 1.54 39.2 3.83 97.3 3.65 92.6
HR-160® 1.73 43.9 4.33 109.9 3.81 96.8
214® 2.32 59.0 3.96 100.5 5.55 141.0
556® 3.72 94.4 5.02 127.6 5.48 139.3
230® 4.44 112.7 7.71 195.8 8.48 215.5
HR-120® 6.15 156.2 7.05 179.0 10.01 254.2
Alloy Cavitation - Mean Depth of Erosion
24 h 48 h 72 h 96 h
mils µm mils µm mils µm mils µm
ULTIMET® 0.3 6.8 0.9 22.9 1.6 40.2 2.3 57.4
6B 0.3 7.7 0.9 22.3 1.4 34.8 1.9 48.0
25 1.0 24.4 2.1 53.6 3.4 85.6 4.5 115.1
625 3.1 80.0 7.0 176.6 10.2 259.2 Not tested Not Tested
556® 3.3 83.8 6.9 175.8 9.6 244.3 11.4 289.8
230® 3.8 97.6> 7.5 190.1 9.9 251.8 11.9 301.7

Tested in accordance with ASTM G 32 water at 16ºC, with a frequenct of 20 kHz and an amplitude of 0.05 mm

Print Page
Back to top